labwired: /home/andrii/worktrees/labwired-core/hw-onboarding/target/debug/labwired boards: esp32s2 sketches: L0_serial_boot, L1_serial_loop, L2_blink_serial, L3_i2c_sensor, L4_spi_sensor, L5_adc, L6_pwm, L7_timer, L8_can out: /home/andrii/worktrees/labwired-core/hw-onboarding/validation/arduino-matrix/out ==> esp32s2 × L0_serial_boot compile: cache hit (firmware.elf) run: pass ==> esp32s2 × L1_serial_loop compile: ok (firmware.elf) run: pass ==> esp32s2 × L2_blink_serial compile: ok (firmware.elf) run: unmodeled ==> esp32s2 × L3_i2c_sensor compile: ok (firmware.elf) run: unmodeled ==> esp32s2 × L4_spi_sensor compile: ok (firmware.elf) run: unmodeled ==> esp32s2 × L5_adc compile: ok (firmware.elf) run: boot_fail ==> esp32s2 × L6_pwm compile: ok (firmware.elf) run: pass ==> esp32s2 × L7_timer compile: ok (firmware.elf) run: pass ==> esp32s2 × L8_can compile: ok (firmware.elf) run: unmodeled Done in 97s — 4 pass / 0 skip / 5 fail (cells 9; gate treats skip as non-fail) Scoreboard: /home/andrii/worktrees/labwired-core/hw-onboarding/validation/arduino-matrix/out/scoreboard.md Docs scoreboard unchanged (partial run; not full 23×9)