labwired: target/debug/labwired boards: esp32s2 sketches: L0_serial_boot, L1_serial_loop, L2_blink_serial, L3_i2c_sensor, L4_spi_sensor, L5_adc, L6_pwm, L7_timer, L8_can out: ~/worktrees/labwired-core/hw-onboarding/validation/arduino-matrix/out ==> esp32s2 × L0_serial_boot compile: cache hit (firmware.elf) run: pass ==> esp32s2 × L1_serial_loop compile: cache hit (firmware.elf) run: pass ==> esp32s2 × L2_blink_serial compile: cache hit (firmware.elf) run: pass ==> esp32s2 × L3_i2c_sensor compile: cache hit (firmware.elf) run: pass ==> esp32s2 × L4_spi_sensor: skip (no S2 GP-SPI model: SPI2 access at 0x3F424030 faults) ==> esp32s2 × L5_adc: skip (no S2 SAR ADC model: analogRead never completes) ==> esp32s2 × L6_pwm compile: cache hit (firmware.elf) run: pass ==> esp32s2 × L7_timer compile: cache hit (firmware.elf) run: pass ==> esp32s2 × L8_can: skip (no S2 TWAI model: the sketch prints LW_L8_FAIL no_can) Done in 7s — 6 pass / 3 skip / 0 fail (cells 9; gate treats skip as non-fail) Scoreboard: ~/worktrees/labwired-core/hw-onboarding/validation/arduino-matrix/out/scoreboard.md Docs scoreboard unchanged (partial run; not full 23×9)