Validation Report: nxp-frdm-imx8mplus

Architecture: ARM multicore cluster.

1. Dynamic Simulation Validation

Status: ✅ Passed (simulation-ok)

[2m2026-10-18T14:40:08.145579Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Starting LabWired Simulator
[2m2026-10-18T14:40:08.147555Z[0m [32m INFO[0m [2mlabwired_core::system::builder[0m[2m:[0m Loading chip descriptor: ../../chips/onboarding/nxp-frdm-imx8mplus.yaml
[2m2026-10-18T14:40:12.760650Z[0m [33m WARN[0m [2mlabwired_core::bus::profiles[0m[2m:[0m GPIO type 'nxp_imx_gpio' (peripheral 'gpio1') has no dedicated register model; falling back to the STM32F1 placeholder layout. This is a known-incomplete onboarding model — set `config.profile` or add a real model for correct behaviour.
[2m2026-10-18T14:40:12.760759Z[0m [33m WARN[0m [2mlabwired_core::bus::profiles[0m[2m:[0m GPIO type 'nxp_imx_gpio' (peripheral 'gpio2') has no dedicated register model; falling back to the STM32F1 placeholder layout. This is a known-incomplete onboarding model — set `config.profile` or add a real model for correct behaviour.
[2m2026-10-18T14:40:12.760798Z[0m [33m WARN[0m [2mlabwired_core::bus::profiles[0m[2m:[0m GPIO type 'nxp_imx_gpio' (peripheral 'gpio3') has no dedicated register model; falling back to the STM32F1 placeholder layout. This is a known-incomplete onboarding model — set `config.profile` or add a real model for correct behaviour.
[2m2026-10-18T14:40:12.760830Z[0m [33m WARN[0m [2mlabwired_core::bus::profiles[0m[2m:[0m GPIO type 'nxp_imx_gpio' (peripheral 'gpio4') has no dedicated register model; falling back to the STM32F1 placeholder layout. This is a known-incomplete onboarding model — set `config.profile` or add a real model for correct behaviour.
[2m2026-10-18T14:40:12.760860Z[0m [33m WARN[0m [2mlabwired_core::bus::profiles[0m[2m:[0m GPIO type 'nxp_imx_gpio' (peripheral 'gpio5') has no dedicated register model; falling back to the STM32F1 placeholder layout. This is a known-incomplete onboarding model — set `config.profile` or add a real model for correct behaviour.
[2m2026-10-18T14:40:12.761125Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Loading firmware: "/home/andrii/Projects/labwired-renode/core/tests/fixtures/uart-ok-thumbv7m.elf"
[2m2026-10-18T14:40:12.761224Z[0m [32m INFO[0m [2mlabwired_loader[0m[2m:[0m ELF Entry Point: 0x401
[2m2026-10-18T14:40:12.761258Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Firmware Loaded Successfully!
[2m2026-10-18T14:40:12.761282Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Entry Point: 0x401
[2m2026-10-18T14:40:12.768489Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Starting Simulation (ARM Cortex-M)...
[2m2026-10-18T14:40:12.768508Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Initial PC: 0x400, SP: 0x20020000
[2m2026-10-18T14:40:12.768514Z[0m [32m INFO[0m [2mlabwired_cli[0m[2m:[0m Running for 20000 steps...
[2m2026-10-18T14:40:12.783387Z[0m [32m INFO[0m [2mlabwired_cli[0m[2m:[0m Progress: 10000 steps, current IPS: 452991.99
[2m2026-10-18T14:40:12.796834Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Simulation loop finished.
[2m2026-10-18T14:40:12.796927Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Final PC: 0x454
[2m2026-10-18T14:40:12.796966Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Total Instructions: 20000
[2m2026-10-18T14:40:12.797000Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Total Cycles: 20004
[2m2026-10-18T14:40:12.797031Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Average IPS: 559833.68

Hardware Coverage Report

Peripheral ID	Base Address	Type
`phy_mac`	`0x00000001`	`ethernetphysicallayer`
`phy_qos`	`0x00000000`	`ethernetphysicallayer`
`pmic`	`0x00000025`	`dummyi2cslave`
`gpio_exp1`	`0x00000020`	`dummyi2cslave`
`gpio_exp2`	`0x00000021`	`dummyi2cslave`
`codec`	`0x0000001a`	`dummyi2cslave`
`gpt1`	`0x302d0000`	`imx_gptimer`
`gpt2`	`0x302e0000`	`imx_gptimer`
`gpt3`	`0x302f0000`	`imx_gptimer`
`gpt4`	`0x30700000`	`imx_gptimer`
`gpt5`	`0x306f0000`	`imx_gptimer`
`gpt6`	`0x306e0000`	`imx_gptimer`
`gpio1`	`0x30200000`	`nxp_imx_gpio`
`gpio2`	`0x30210000`	`nxp_imx_gpio`
`gpio3`	`0x30220000`	`nxp_imx_gpio`
`gpio4`	`0x30230000`	`nxp_imx_gpio`
`gpio5`	`0x30240000`	`nxp_imx_gpio`
`uart1`	`0x30860000`	`mxcuart`
`uart2`	`0x30890000`	`mxcuart`
`uart3`	`0x30880000`	`mxcuart`
`uart4`	`0x30a60000`	`mxcuart`
`usdhc1`	`0x30b40000`	`nxp_usdhc`
`usdhc2`	`0x30b50000`	`nxp_usdhc`
`usdhc3`	`0x30b60000`	`nxp_usdhc`
`wdog1`	`0x30280000`	`nxp_imx_watchdog`
`wdog2`	`0x30290000`	`nxp_imx_watchdog`
`wdog3`	`0x302a0000`	`nxp_imx_watchdog`
`src`	`0x30390000`	`nxp_imx8mp_systemresetcontroller`
`flexcan1`	`0x308c0000`	`nxp_flexcan`
`flexcan2`	`0x308d0000`	`nxp_flexcan`
`eth_mac`	`0x30be0000`	`k6xf_ethernet`
`eth_qos`	`0x30bf0000`	`synopsysdwcethernetqualityofservice`
`i2c1`	`0x30a20000`	`stub`
`i2c2`	`0x30a30000`	`stub`
`i2c3`	`0x30a40000`	`stub`
`i2c4`	`0x30a50000`	`stub`
`i2c5`	`0x30ad0000`	`stub`
`i2c6`	`0x30ae0000`	`stub`
`apis1_gpc`	`0x303a0000`	`pythonperipheral`
`ecspi1`	`0x30820000`	`stub`
`ecspi2`	`0x30830000`	`stub`
`ecspi3`	`0x30840000`	`stub`

Total Peripherals: 42