Skip to content

BMP280

Bosch BMP280 pressure + temperature (I²C/SPI).

Live catalog

Prefer labwired_describe with the catalog id over guessing pins or addresses.

Status at a glance

Aspect Status
Catalog id bmp280
Bus I²C (primary in playground)
Address / select 0x76 / 0x77
Source Rust kit bmp280.rs
Tier See matrix below

Pins / attachment

Pin / net Role
SDA/SDI Data
SCL/SCK Clock

Support matrix

Behavior Status Notes
Pressure / temp reads ✅ Digital twin
Compensation formulas ⚠️ Check demo fidelity
SPI mode ⚠️ Prefer I²C unless wired SPI kit

How to run

  1. Place part + MCU in Playground (or system YAML).
  2. Agent: labwired_list → labwired_describe id=bmp280 → wire → labwired_validate → labwired_run / labwired_verify.
  3. Weather-station style labs.