Arduino × LabWired board matrix

Generated 2026-08-12 20:11:39 +0200 by validation/arduino-matrix/run_matrix.py.

Legend: ✅ pass · 🔧 compile/build fail · 📦 toolchain missing · 🔴 boot/sim fail · 🟠 oracle miss · 🟣 unmodeled · ⏱️ timeout

chip	L0_serial_boot	L1_serial_loop	L2_blink_serial	L3_i2c_sensor	L4_spi_sensor	L5_adc	L6_pwm	L7_timer	L8_can	notes
esp32	✅	✅	✅	✅	✅	✅	✅	✅	✅
esp32c3	✅	✅	✅	✅	✅	✅	✅	✅	⏭️	L8_can:skipped
esp32s3	✅	✅	✅	✅	✅	✅	✅	✅	✅
nrf52832	✅	✅	✅	✅	✅	✅	✅	✅	⏭️	L8_can:skipped
nrf52840	✅	✅	✅	✅	✅	✅	✅	✅	⏭️	L8_can:skipped
rp2040	✅	✅	✅	✅	✅	✅	✅	✅	⏭️	L8_can:skipped
stm32f103	✅	✅	✅	✅	✅	✅	✅	✅	✅
stm32f401	✅	✅	✅	✅	✅	✅	✅	✅	⏭️	L8_can:skipped
stm32f407	✅	✅	✅	✅	✅	✅	✅	✅	✅
stm32g474re	✅	✅	✅	✅	✅	✅	✅	✅	⏭️	L8_can:skipped
stm32h563	✅	✅	✅	✅	✅	✅	✅	✅	✅
stm32l073	✅	✅	✅	✅	✅	✅	✅	✅	⏭️	L8_can:skipped
stm32l476	✅	✅	✅	✅	✅	✅	✅	✅	✅
stm32wb55	✅	✅	✅	✅	✅	✅	✅	✅	⏭️	L8_can:skipped
stm32wba52	✅	✅	✅	✅	✅	⏭️	✅	✅	⏭️	L5_adc:skipped; L8_can:skipped
atmega328p	✅	✅	✅	✅	✅	✅	✅	✅	⏭️	L8_can:skipped

Summary

• Cells: 144
• pass: 133 · skip: 11 · fail: 0

Status breakdown

• pass: 133
• skipped: 11

Skips are explicit boards.yaml gaps (honest non-runs). Do not report pass+skip as a single “green” total.

Non-pass detail (fails + skips)

esp32c3 × L8_can → skipped

TWAI0 declarative-only (no self-RX model for matrix L8)

nrf52832 × L8_can → skipped

No on-chip CAN model

nrf52840 × L8_can → skipped

No on-chip CAN model

rp2040 × L8_can → skipped

No on-chip CAN model

stm32f401 × L8_can → skipped

No bxCAN/FDCAN in chip yaml

stm32g474re × L8_can → skipped

No FDCAN in chip yaml for matrix L8

stm32l073 × L8_can → skipped

No CAN peripheral on L0 series

stm32wb55 × L8_can → skipped

No CAN model in matrix path

stm32wba52 × L5_adc → skipped

No ADC model in stm32wba52 chip yaml yet

stm32wba52 × L8_can → skipped

No CAN model in matrix path

atmega328p × L8_can → skipped

ATmega328P has no CAN controller