Skip to content

Validation Report: nxp-k6xf

Superseded. This is the auto-generated report for the staged onboarding/nxp-k6xf descriptor (a generic UART fixture on a placeholder memory map). The promoted K64F part is mk64f12, and the board package is FRDM-K64F. The staged descriptor stays only because crates/core/src/bus/known_stubs.rs still cites it.

Architecture: ARMv7-M.

1. Dynamic Simulation Validation

Status: ✅ Passed (simulation-ok)

2026-10-18T14:40:13.656498Z  INFO labwired_cli::commands::run: Starting LabWired Simulator
2026-10-18T14:40:13.656881Z  INFO labwired_core::system::builder: Loading chip descriptor: ../../chips/onboarding/nxp-k6xf.yaml
2026-10-18T14:40:13.658483Z  INFO labwired_cli::commands::run: Loading firmware: "/home/andrii/Projects/labwired-renode/core/tests/fixtures/uart-ok-thumbv7m.elf"
2026-10-18T14:40:13.658611Z  INFO labwired_loader: ELF Entry Point: 0x401
2026-10-18T14:40:13.658635Z  INFO labwired_cli::commands::run: Firmware Loaded Successfully!
2026-10-18T14:40:13.658639Z  INFO labwired_cli::commands::run: Entry Point: 0x401
2026-10-18T14:40:13.661031Z  INFO labwired_cli::commands::run: Starting Simulation (ARM Cortex-M)...
2026-10-18T14:40:13.661109Z  INFO labwired_cli::commands::run: Initial PC: 0x400, SP: 0x20020000
2026-10-18T14:40:13.661147Z  INFO labwired_cli: Running for 20000 steps...
2026-10-18T14:40:13.661248Z  INFO labwired_cli: Simulation Error at step 2: Memory access violation at 0x2001ffe0
2026-10-18T14:40:13.661301Z  INFO labwired_cli::report: Simulation loop finished.
2026-10-18T14:40:13.661329Z  INFO labwired_cli::report: Final PC: 0x45c
2026-10-18T14:40:13.661355Z  INFO labwired_cli::report: Total Instructions: 2
2026-10-18T14:40:13.661381Z  INFO labwired_cli::report: Total Cycles: 2
2026-10-18T14:40:13.661408Z  INFO labwired_cli::report: Average IPS: 725.10

Hardware Coverage Report

Peripheral ID Base Address Type
uart0 0x4006a000 k6xf_uart
mcg 0x40064000 k6xf_mcg
sim 0x40047000 k6xf_sim
eth 0x400c0000 k6xf_ethernet
phy 0x00000000 ethernetphysicallayer
rng 0x40029000 k6xf_rng

Total Peripherals: 6