Validation Report: renesas-ek_ra8m1

Superseded. This is the auto-generated report for the staged onboarding/renesas-ek_ra8m1 descriptor (a generic UART fixture on a placeholder memory map: flash at 0x0800_0000 and RAM at 0x3000_0000, not the RA8M1's code flash at 0x0200_0000 and SRAM at 0x2200_0000). The promoted RA8M1 part is r7fa8m1ah, and the board package is EK-RA8M1.

Architecture: ARM Cortex-M85.

1. Dynamic Simulation Validation

Status: ✅ Passed (simulation-ok)

[2m2026-10-18T14:40:20.654040Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Starting LabWired Simulator
[2m2026-10-18T14:40:20.654681Z[0m [32m INFO[0m [2mlabwired_core::system::builder[0m[2m:[0m Loading chip descriptor: ../../chips/onboarding/renesas-ek_ra8m1.yaml
[2m2026-10-18T14:40:20.657896Z[0m [33m WARN[0m [2mlabwired_core::bus::profiles[0m[2m:[0m GPIO type 'renesasra_gpiomisc' (peripheral 'portMisc') has no dedicated register model; falling back to the STM32F1 placeholder layout. This is a known-incomplete onboarding model — set `config.profile` or add a real model for correct behaviour.
[2m2026-10-18T14:40:20.658117Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Loading firmware: "/home/andrii/Projects/labwired-renode/core/tests/fixtures/uart-ok-thumbv7m.elf"
[2m2026-10-18T14:40:20.658906Z[0m [32m INFO[0m [2mlabwired_loader[0m[2m:[0m ELF Entry Point: 0x401
[2m2026-10-18T14:40:20.659286Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Firmware Loaded Successfully!
[2m2026-10-18T14:40:20.659333Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Entry Point: 0x401
[2m2026-10-18T14:40:20.660438Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Starting Simulation (ARM Cortex-M)...
[2m2026-10-18T14:40:20.662447Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Initial PC: 0x400, SP: 0x20020000
[2m2026-10-18T14:40:20.662515Z[0m [32m INFO[0m [2mlabwired_cli[0m[2m:[0m Running for 20000 steps...
[2m2026-10-18T14:40:20.662637Z[0m [32m INFO[0m [2mlabwired_cli[0m[2m:[0m Simulation Error at step 2: Memory access violation at 0x2001ffe0
[2m2026-10-18T14:40:20.662932Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Simulation loop finished.
[2m2026-10-18T14:40:20.662975Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Final PC: 0x45c
[2m2026-10-18T14:40:20.663002Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Total Instructions: 2
[2m2026-10-18T14:40:20.664291Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Total Cycles: 2
[2m2026-10-18T14:40:20.664362Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Average IPS: 400.13

Hardware Coverage Report

Peripheral ID	Base Address	Type
`led_blue`	`0x00000000`	`led`
`led_green`	`0x0000000e`	`led`
`led_red`	`0x0000000d`	`led`
`button_s2`	`0x00000008`	`button`
`button_s1`	`0x00000009`	`button`
`gpt`	`0x40322000`	`renesasra_gpt`
`gpt_ns`	`0x50322000`	`renesasra_gpt`
`agt0`	`0x40221000`	`renesasra_agt`
`agt1`	`0x40221100`	`renesasra_agt`
`sci0`	`0x40358000`	`renesasra8m1_sci`
`sci1`	`0x40358100`	`renesasra8m1_sci`
`sci2`	`0x40358200`	`renesasra8m1_sci`
`sci3`	`0x40358300`	`renesasra8m1_sci`
`sci4`	`0x40358400`	`renesasra8m1_sci`
`sci9`	`0x40358900`	`renesasra8m1_sci`
`portMisc`	`0x40400d00`	`renesasra_gpiomisc`
`SYSC_SCICKCR`	`0x4001e055`	`pythonperipheral`
`iic0`	`0x4025e000`	`stub`
`iic1`	`0x4025e100`	`stub`

Total Peripherals: 19