Validation Report: stm32l071

Architecture: ARMv6-M.

1. Dynamic Simulation Validation

Status: ✅ Passed (simulation-ok)

[2m2026-10-18T14:40:32.533102Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Starting LabWired Simulator
[2m2026-10-18T14:40:32.536557Z[0m [32m INFO[0m [2mlabwired_core::system::builder[0m[2m:[0m Loading chip descriptor: ../../chips/onboarding/stm32l071.yaml
[2m2026-10-18T14:40:32.538196Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Loading firmware: "/home/andrii/Projects/labwired-renode/core/tests/fixtures/uart-ok-thumbv7m.elf"
[2m2026-10-18T14:40:32.538268Z[0m [32m INFO[0m [2mlabwired_loader[0m[2m:[0m ELF Entry Point: 0x401
[2m2026-10-18T14:40:32.538275Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Firmware Loaded Successfully!
[2m2026-10-18T14:40:32.538280Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Entry Point: 0x401
[2m2026-10-18T14:40:32.541202Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Starting Simulation (ARM Cortex-M)...
[2m2026-10-18T14:40:32.541269Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Initial PC: 0x400, SP: 0x20020000
[2m2026-10-18T14:40:32.541302Z[0m [32m INFO[0m [2mlabwired_cli[0m[2m:[0m Running for 20000 steps...
[2m2026-10-18T14:40:32.541392Z[0m [32m INFO[0m [2mlabwired_cli[0m[2m:[0m Simulation Error at step 2: Memory access violation at 0x2001ffe0
[2m2026-10-18T14:40:32.541444Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Simulation loop finished.
[2m2026-10-18T14:40:32.541473Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Final PC: 0x45c
[2m2026-10-18T14:40:32.541496Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Total Instructions: 2
[2m2026-10-18T14:40:32.541519Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Total Cycles: 2
[2m2026-10-18T14:40:32.541543Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Average IPS: 613.81

Hardware Coverage Report

Peripheral ID	Base Address	Type
`adc1`	`0x40012400`	`stm32_adc`
`gpioPortA`	`0x50000000`	`stm32_gpioport`
`gpioPortB`	`0x50000400`	`stm32_gpioport`
`gpioPortC`	`0x50000800`	`stm32_gpioport`
`gpioPortD`	`0x50000c00`	`stm32_gpioport`
`gpioPortH`	`0x50001c00`	`stm32_gpioport`
`gpioPortE`	`0x50001000`	`stm32_gpioport`
`i2c1`	`0x40005400`	`stm32f7_i2c`
`i2c2`	`0x40005800`	`stm32f7_i2c`
`i2c3`	`0x40007800`	`stm32f7_i2c`
`rcc`	`0x40021000`	`stm32l0_rcc`
`rtc`	`0x40002800`	`stm32f4_rtc`
`spi1`	`0x40013000`	`stm32spi`
`spi2`	`0x40003800`	`stm32spi`
`timer2`	`0x40000000`	`stm32_timer`
`timer3`	`0x40000400`	`stm32_timer`
`timer21`	`0x40010800`	`stm32_timer`
`timer22`	`0x40011400`	`stm32_timer`
`timer6`	`0x40001000`	`stm32_timer`
`timer7`	`0x40001400`	`stm32_timer`
`usart2`	`0x40004400`	`stm32f7_usart`
`usart1`	`0x40013800`	`stm32f7_usart`
`lpuart1`	`0x40004800`	`stm32f7_usart`
`usart4`	`0x40004c00`	`stm32f7_usart`
`usart5`	`0x40005000`	`stm32f7_usart`
`iwdg`	`0x40003000`	`stm32_independentwatchdog`
`dma1`	`0x40020000`	`stm32g0dma`
`pwr`	`0x40007000`	`stm32l0_pwr`
`lptim1`	`0x40007c00`	`stm32l0_lptimer`
`crc`	`0x40023000`	`stm32_crc`

Total Peripherals: 30