Validation Report: stm32l151

Architecture: ARMv7-M.

1. Dynamic Simulation Validation

Status: ✅ Passed (simulation-ok)

[2m2026-10-18T14:40:32.781165Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Starting LabWired Simulator
[2m2026-10-18T14:40:32.781668Z[0m [32m INFO[0m [2mlabwired_core::system::builder[0m[2m:[0m Loading chip descriptor: ../../chips/onboarding/stm32l151.yaml
[2m2026-10-18T14:40:32.783174Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Loading firmware: "/home/andrii/Projects/labwired-renode/core/tests/fixtures/uart-ok-thumbv7m.elf"
[2m2026-10-18T14:40:32.783286Z[0m [32m INFO[0m [2mlabwired_loader[0m[2m:[0m ELF Entry Point: 0x401
[2m2026-10-18T14:40:32.783307Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Firmware Loaded Successfully!
[2m2026-10-18T14:40:32.783312Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Entry Point: 0x401
[2m2026-10-18T14:40:32.786356Z[0m [33m WARN[0m [2mlabwired_core[0m[2m:[0m Failed to load segment at 0x0 - outside of memory map
[2m2026-10-18T14:40:32.789464Z[0m [33m WARN[0m [2mlabwired_core[0m[2m:[0m Failed to load segment at 0x400 - outside of memory map
[2m2026-10-18T14:40:32.789519Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Starting Simulation (ARM Cortex-M)...
[2m2026-10-18T14:40:32.789525Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Initial PC: 0x400, SP: 0x20020000
[2m2026-10-18T14:40:32.789535Z[0m [32m INFO[0m [2mlabwired_cli[0m[2m:[0m Running for 20000 steps...
[2m2026-10-18T14:40:32.789558Z[0m [32m INFO[0m [2mlabwired_cli[0m[2m:[0m Simulation Error at step 0: Memory access violation at 0x400
[2m2026-10-18T14:40:32.789577Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Simulation loop finished.
[2m2026-10-18T14:40:32.789581Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Final PC: 0x400
[2m2026-10-18T14:40:32.789585Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Total Instructions: 0
[2m2026-10-18T14:40:32.789590Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Total Cycles: 0
[2m2026-10-18T14:40:32.789594Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Average IPS: 0.00

Hardware Coverage Report

Peripheral ID	Base Address	Type
`spi1`	`0x40013000`	`stm32spi`
`spi2`	`0x40003800`	`stm32spi`
`spi3`	`0x40003c00`	`stm32spi`
`usart1`	`0x40013800`	`stm32_uart`
`usart2`	`0x40004400`	`stm32_uart`
`usart3`	`0x40004800`	`stm32_uart`
`gpioPortA`	`0x40020000`	`stm32_gpioport`
`gpioPortB`	`0x40020400`	`stm32_gpioport`
`gpioPortC`	`0x40020800`	`stm32_gpioport`
`gpioPortD`	`0x40020c00`	`stm32_gpioport`
`gpioPortE`	`0x40021000`	`stm32_gpioport`
`gpioPortF`	`0x40021800`	`stm32_gpioport`
`gpioPortG`	`0x40021c00`	`stm32_gpioport`
`gpioPortH`	`0x40021400`	`stm32_gpioport`
`dma1`	`0x40026000`	`stm32ldma`
`i2c1`	`0x40005400`	`stm32f1_i2c`
`bitbandPeripherals`	`0x42000000`	`bitbanding`
`bitbandSram`	`0x22000000`	`bitbanding`
`timer2`	`0x40000000`	`stm32_timer`
`timer3`	`0x40000400`	`stm32_timer`
`timer4`	`0x40000800`	`stm32_timer`
`timer5`	`0x40000c00`	`stm32_timer`
`timer6`	`0x40001000`	`stm32_timer`
`timer7`	`0x40001400`	`stm32_timer`
`timer9`	`0x40010800`	`stm32_timer`
`timer10`	`0x40010c00`	`stm32_timer`
`timer11`	`0x40011000`	`stm32_timer`
`rccCsr`	`0x40023834`	`pythonperipheral`
`rccIcscr`	`0x40023804`	`pythonperipheral`

Total Peripherals: 29