Validation Report: ut32m0r500
Architecture: ARM Cortex-M0+.
1. Dynamic Simulation Validation
Status: ✅ Passed (simulation-ok)
[2m2026-10-18T14:40:36.751422Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Starting LabWired Simulator
[2m2026-10-18T14:40:36.751808Z[0m [32m INFO[0m [2mlabwired_core::system::builder[0m[2m:[0m Loading chip descriptor: ../../chips/onboarding/ut32m0r500.yaml
[2m2026-10-18T14:40:36.753212Z[0m [33m WARN[0m [2mlabwired_core::bus::profiles[0m[2m:[0m GPIO type 'arm_ahb_gpio' (peripheral 'gpio0') has no dedicated register model; falling back to the STM32F1 placeholder layout. This is a known-incomplete onboarding model — set `config.profile` or add a real model for correct behaviour.
[2m2026-10-18T14:40:36.753290Z[0m [33m WARN[0m [2mlabwired_core::bus::profiles[0m[2m:[0m GPIO type 'arm_ahb_gpio' (peripheral 'gpio1') has no dedicated register model; falling back to the STM32F1 placeholder layout. This is a known-incomplete onboarding model — set `config.profile` or add a real model for correct behaviour.
[2m2026-10-18T14:40:36.753328Z[0m [33m WARN[0m [2mlabwired_core::bus::profiles[0m[2m:[0m GPIO type 'arm_ahb_gpio' (peripheral 'gpio2') has no dedicated register model; falling back to the STM32F1 placeholder layout. This is a known-incomplete onboarding model — set `config.profile` or add a real model for correct behaviour.
[2m2026-10-18T14:40:36.753471Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Loading firmware: "/home/andrii/Projects/labwired-renode/core/tests/fixtures/uart-ok-thumbv7m.elf"
[2m2026-10-18T14:40:36.753617Z[0m [32m INFO[0m [2mlabwired_loader[0m[2m:[0m ELF Entry Point: 0x401
[2m2026-10-18T14:40:36.753652Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Firmware Loaded Successfully!
[2m2026-10-18T14:40:36.753659Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Entry Point: 0x401
[2m2026-10-18T14:40:36.754373Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Starting Simulation (ARM Cortex-M)...
[2m2026-10-18T14:40:36.754380Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Initial PC: 0x400, SP: 0x20020000
[2m2026-10-18T14:40:36.754385Z[0m [32m INFO[0m [2mlabwired_cli[0m[2m:[0m Running for 20000 steps...
[2m2026-10-18T14:40:36.754502Z[0m [32m INFO[0m [2mlabwired_cli[0m[2m:[0m Simulation Error at step 2: Memory access violation at 0x2001ffe0
[2m2026-10-18T14:40:36.754520Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Simulation loop finished.
[2m2026-10-18T14:40:36.754525Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Final PC: 0x45c
[2m2026-10-18T14:40:36.754528Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Total Instructions: 2
[2m2026-10-18T14:40:36.754532Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Total Cycles: 2
[2m2026-10-18T14:40:36.754537Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Average IPS: 2290.82
Hardware Coverage Report
| Peripheral ID | Base Address | Type |
|---|---|---|
uart0 |
0x40004000 |
gaislerapbuart |
uart1 |
0x40005000 |
gaislerapbuart |
timer0 |
0x40001000 |
arm_sp804_timer |
timer1 |
0x40002000 |
arm_sp804_timer |
adc |
0x4000f000 |
stub |
gpio0 |
0x40020000 |
arm_ahb_gpio |
gpio1 |
0x40021000 |
arm_ahb_gpio |
gpio2 |
0x40022000 |
arm_ahb_gpio |
can0 |
0x40023000 |
stub |
can1 |
0x40024000 |
stub |
Total Peripherals: 10