Validation Report: zolertia-firefly
Architecture: ARM Cortex-M3.
1. Dynamic Simulation Validation
Status: ✅ Passed (simulation-ok)
[2m2026-10-18T14:40:39.866581Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Starting LabWired Simulator
[2m2026-10-18T14:40:39.867784Z[0m [32m INFO[0m [2mlabwired_core::system::builder[0m[2m:[0m Loading chip descriptor: ../../chips/onboarding/zolertia-firefly.yaml
[2m2026-10-18T14:40:39.868771Z[0m [33m WARN[0m [2mlabwired_core::bus::profiles[0m[2m:[0m GPIO type 'cc2538_gpio' (peripheral 'gpioA') has no dedicated register model; falling back to the STM32F1 placeholder layout. This is a known-incomplete onboarding model — set `config.profile` or add a real model for correct behaviour.
[2m2026-10-18T14:40:39.868803Z[0m [33m WARN[0m [2mlabwired_core::bus::profiles[0m[2m:[0m GPIO type 'cc2538_gpio' (peripheral 'gpioB') has no dedicated register model; falling back to the STM32F1 placeholder layout. This is a known-incomplete onboarding model — set `config.profile` or add a real model for correct behaviour.
[2m2026-10-18T14:40:39.868814Z[0m [33m WARN[0m [2mlabwired_core::bus::profiles[0m[2m:[0m GPIO type 'cc2538_gpio' (peripheral 'gpioC') has no dedicated register model; falling back to the STM32F1 placeholder layout. This is a known-incomplete onboarding model — set `config.profile` or add a real model for correct behaviour.
[2m2026-10-18T14:40:39.868824Z[0m [33m WARN[0m [2mlabwired_core::bus::profiles[0m[2m:[0m GPIO type 'cc2538_gpio' (peripheral 'gpioD') has no dedicated register model; falling back to the STM32F1 placeholder layout. This is a known-incomplete onboarding model — set `config.profile` or add a real model for correct behaviour.
[2m2026-10-18T14:40:39.868949Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Loading firmware: "/home/andrii/Projects/labwired-renode/core/tests/fixtures/uart-ok-thumbv7m.elf"
[2m2026-10-18T14:40:39.869013Z[0m [32m INFO[0m [2mlabwired_loader[0m[2m:[0m ELF Entry Point: 0x401
[2m2026-10-18T14:40:39.869020Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Firmware Loaded Successfully!
[2m2026-10-18T14:40:39.869024Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Entry Point: 0x401
[2m2026-10-18T14:40:39.869942Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Starting Simulation (ARM Cortex-M)...
[2m2026-10-18T14:40:39.870000Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Initial PC: 0x400, SP: 0x20020000
[2m2026-10-18T14:40:39.870037Z[0m [32m INFO[0m [2mlabwired_cli[0m[2m:[0m Running for 20000 steps...
[2m2026-10-18T14:40:39.874349Z[0m [32m INFO[0m [2mlabwired_cli[0m[2m:[0m Progress: 10000 steps, current IPS: 1880338.22
[2m2026-10-18T14:40:39.878953Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Simulation loop finished.
[2m2026-10-18T14:40:39.879028Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Final PC: 0x454
[2m2026-10-18T14:40:39.879058Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Total Instructions: 20000
[2m2026-10-18T14:40:39.879090Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Total Cycles: 20004
[2m2026-10-18T14:40:39.879117Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Average IPS: 1982466.47
Hardware Coverage Report
| Peripheral ID | Base Address | Type |
|---|---|---|
cc1200 |
0x00000000 |
cc1200 |
uDma |
0x400ff000 |
udma |
uart0 |
0x4000c000 |
pl011 |
watchdog |
0x400d5000 |
cc2538watchdog |
sleepTimer |
0x400d5040 |
cc2538sleeptimer |
uart1 |
0x4000d000 |
pl011 |
gpioA |
0x400d9000 |
cc2538_gpio |
gpioB |
0x400da000 |
cc2538_gpio |
gpioC |
0x400db000 |
cc2538_gpio |
gpioD |
0x400dc000 |
cc2538_gpio |
radio |
0x40088000 |
cc2538rf |
bitband |
0x22000000 |
bitbanding |
crypto |
0x4008b000 |
cc2538_cryptoprocessor |
flashCtrl |
0x400d3000 |
cc2538flashcontroller |
ssi0 |
0x40008000 |
cc2538_ssi |
ssi1 |
0x40009000 |
cc2538_ssi |
Total Peripherals: 16