Validation Report: zynq-7000

Architecture: Dual ARM Cortex-A9.

1. Dynamic Simulation Validation

Status: ✅ Passed (simulation-ok)

[2m2026-10-18T14:40:39.941178Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Starting LabWired Simulator
[2m2026-10-18T14:40:39.943563Z[0m [32m INFO[0m [2mlabwired_core::system::builder[0m[2m:[0m Loading chip descriptor: ../../chips/onboarding/zynq-7000.yaml
[2m2026-10-18T14:40:41.749185Z[0m [33m WARN[0m [2mlabwired_core::bus::profiles[0m[2m:[0m GPIO type 'xilinxgpiops' (peripheral 'gpio') has no dedicated register model; falling back to the STM32F1 placeholder layout. This is a known-incomplete onboarding model — set `config.profile` or add a real model for correct behaviour.
[2m2026-10-18T14:40:41.749365Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Loading firmware: "/home/andrii/Projects/labwired-renode/core/tests/fixtures/uart-ok-thumbv7m.elf"
[2m2026-10-18T14:40:41.749463Z[0m [32m INFO[0m [2mlabwired_loader[0m[2m:[0m ELF Entry Point: 0x401
[2m2026-10-18T14:40:41.749477Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Firmware Loaded Successfully!
[2m2026-10-18T14:40:41.749482Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Entry Point: 0x401
[2m2026-10-18T14:40:41.750663Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Starting Simulation (ARM Cortex-M)...
[2m2026-10-18T14:40:41.750677Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Initial PC: 0x400, SP: 0x20020000
[2m2026-10-18T14:40:41.750687Z[0m [32m INFO[0m [2mlabwired_cli[0m[2m:[0m Running for 20000 steps...
[2m2026-10-18T14:40:41.761242Z[0m [32m INFO[0m [2mlabwired_cli[0m[2m:[0m Progress: 10000 steps, current IPS: 851462.71
[2m2026-10-18T14:40:41.768729Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Simulation loop finished.
[2m2026-10-18T14:40:41.768746Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Final PC: 0x454
[2m2026-10-18T14:40:41.768753Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Total Instructions: 20000
[2m2026-10-18T14:40:41.768757Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Total Cycles: 20004
[2m2026-10-18T14:40:41.768761Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Average IPS: 1037957.81

Hardware Coverage Report

Peripheral ID	Base Address	Type
`usbEhci2`	`0xe0003000`	`ehcihostcontroller`
`usbEhci`	`0xe0002000`	`ehcihostcontroller`
`pl310`	`0xf8f02000`	`pl310`
`gem0`	`0xe000b000`	`cadencegem`
`gem1`	`0xe000c000`	`cadencegem`
`uart0`	`0xe0000000`	`cadence_uart`
`uart1`	`0xe0001000`	`cadence_uart`
`i2c1`	`0xe0005000`	`stub`
`i2c0`	`0xe0004000`	`stub`
`spi0`	`0xe0006000`	`stub`
`spi1`	`0xe0007000`	`stub`
`sdhci0`	`0xe0100000`	`stub`
`sdhci1`	`0xe0101000`	`stub`
`ttc0`	`0xf8001000`	`cadence_ttc`
`ttc1`	`0xf8002000`	`cadence_ttc`
`watchdog0`	`0xf8005000`	`stub`
`globalTimer`	`0xf8f00200`	`arm_globaltimer`
`scu`	`0xf8f00000`	`armsnoopcontrolunit`
`qspi`	`0xe000d000`	`xilinxqspi`
`gpio`	`0xe000a000`	`xilinxgpiops`
`xadc`	`0xf8007100`	`stub`
`slcr`	`0xf8000000`	`stub`
`nand`	`0xe000e000`	`pythonperipheral`
`dma_pl330`	`0xf8003000`	`pl330_dma`

Total Peripherals: 24