Validation Report: zynqmp-zcu104

Architecture: Quad ARM Cortex-A53.

1. Dynamic Simulation Validation

Status: ✅ Passed (simulation-ok)

[2m2026-10-18T14:40:44.467223Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Starting LabWired Simulator
[2m2026-10-18T14:40:44.470024Z[0m [32m INFO[0m [2mlabwired_core::system::builder[0m[2m:[0m Loading chip descriptor: ../../chips/onboarding/zynqmp-zcu104.yaml
[2m2026-10-18T14:40:45.243813Z[0m [33m WARN[0m [2mlabwired_core::bus::profiles[0m[2m:[0m GPIO type 'xilinxgpiops' (peripheral 'gpio') has no dedicated register model; falling back to the STM32F1 placeholder layout. This is a known-incomplete onboarding model — set `config.profile` or add a real model for correct behaviour.
[2m2026-10-18T14:40:45.244007Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Loading firmware: "/home/andrii/Projects/labwired-renode/core/tests/fixtures/uart-ok-thumbv7m.elf"
[2m2026-10-18T14:40:45.244155Z[0m [32m INFO[0m [2mlabwired_loader[0m[2m:[0m ELF Entry Point: 0x401
[2m2026-10-18T14:40:45.244197Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Firmware Loaded Successfully!
[2m2026-10-18T14:40:45.244225Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Entry Point: 0x401
[2m2026-10-18T14:40:45.246600Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Starting Simulation (ARM Cortex-M)...
[2m2026-10-18T14:40:45.249447Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Initial PC: 0x400, SP: 0x20020000
[2m2026-10-18T14:40:45.249471Z[0m [32m INFO[0m [2mlabwired_cli[0m[2m:[0m Running for 20000 steps...
[2m2026-10-18T14:40:45.254072Z[0m [32m INFO[0m [2mlabwired_cli[0m[2m:[0m Progress: 10000 steps, current IPS: 1018466.62
[2m2026-10-18T14:40:45.267468Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Simulation loop finished.
[2m2026-10-18T14:40:45.267485Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Final PC: 0x454
[2m2026-10-18T14:40:45.267492Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Total Instructions: 20000
[2m2026-10-18T14:40:45.267497Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Total Cycles: 20004
[2m2026-10-18T14:40:45.267501Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Average IPS: 860182.72

Hardware Coverage Report

Peripheral ID	Base Address	Type
`phy3`	`0x0000000c`	`ethernetphysicallayer`
`i2c_mux`	`0x00000074`	`pca9548`
`tca6416_u97`	`0x00000020`	`tca6416`
`apu0Timer`	`0x0000000f`	`arm_generictimer`
`apu1Timer`	`0x0000000f`	`arm_generictimer`
`apu2Timer`	`0x0000000f`	`arm_generictimer`
`apu3Timer`	`0x0000000f`	`arm_generictimer`
`uart0`	`0xff000000`	`cadence_uart`
`uart1`	`0xff010000`	`cadence_uart`
`i2c0`	`0xff020000`	`stub`
`i2c1`	`0xff030000`	`stub`
`ttc0`	`0xff110000`	`cadence_ttc`
`ttc1`	`0xff120000`	`cadence_ttc`
`ttc2`	`0xff130000`	`cadence_ttc`
`ttc3`	`0xff140000`	`cadence_ttc`
`gem0`	`0xff0b0000`	`cadencegem`
`gem1`	`0xff0c0000`	`cadencegem`
`gem2`	`0xff0d0000`	`cadencegem`
`gem3`	`0xff0e0000`	`cadencegem`
`phy`	`0x00000000`	`ethernetphysicallayer`
`gpio`	`0xff0a0000`	`xilinxgpiops`
`ipi`	`0xff300000`	`stub`
`rtc`	`0xffa60000`	`stub`
`platformManagementUnit`	`0x0000000a`	`stub`
`L1_PLL_STATUS_READ_1_SERDES_REGISTER`	`0xfd4063e4`	`arraymemory`
`L2_PLL_STATUS_READ_1_SERDES_REGISTER`	`0xfd40a3e4`	`arraymemory`
`L3_PLL_STATUS_READ_1_SERDES_REGISTER`	`0xfd40e3e4`	`arraymemory`
`PS_CTRL_STATUS_AMS_REGISTER`	`0xffa50040`	`pythonperipheral`
`qspi`	`0xff0f0000`	`stub`

Total Peripherals: 29