Validation Report: zynqmp-zcu106-vcu
Architecture: ARM multicore cluster.
1. Dynamic Simulation Validation
Status: ✅ Passed (simulation-ok)
[2m2026-10-18T14:40:45.503389Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Starting LabWired Simulator
[2m2026-10-18T14:40:45.504897Z[0m [32m INFO[0m [2mlabwired_core::system::builder[0m[2m:[0m Loading chip descriptor: ../../chips/onboarding/zynqmp-zcu106-vcu.yaml
[2m2026-10-18T14:40:46.037861Z[0m [33m WARN[0m [2mlabwired_core::bus::profiles[0m[2m:[0m GPIO type 'xilinxgpiops' (peripheral 'gpio') has no dedicated register model; falling back to the STM32F1 placeholder layout. This is a known-incomplete onboarding model — set `config.profile` or add a real model for correct behaviour.
[2m2026-10-18T14:40:46.038114Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Loading firmware: "/home/andrii/Projects/labwired-renode/core/tests/fixtures/uart-ok-thumbv7m.elf"
[2m2026-10-18T14:40:46.038245Z[0m [32m INFO[0m [2mlabwired_loader[0m[2m:[0m ELF Entry Point: 0x401
[2m2026-10-18T14:40:46.038294Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Firmware Loaded Successfully!
[2m2026-10-18T14:40:46.038330Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Entry Point: 0x401
[2m2026-10-18T14:40:46.039597Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Starting Simulation (ARM Cortex-M)...
[2m2026-10-18T14:40:46.039653Z[0m [32m INFO[0m [2mlabwired_cli::commands::run[0m[2m:[0m Initial PC: 0x400, SP: 0x20020000
[2m2026-10-18T14:40:46.039689Z[0m [32m INFO[0m [2mlabwired_cli[0m[2m:[0m Running for 20000 steps...
[2m2026-10-18T14:40:46.044099Z[0m [32m INFO[0m [2mlabwired_cli[0m[2m:[0m Progress: 10000 steps, current IPS: 1745271.05
[2m2026-10-18T14:40:46.048127Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Simulation loop finished.
[2m2026-10-18T14:40:46.048209Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Final PC: 0x454
[2m2026-10-18T14:40:46.048244Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Total Instructions: 20000
[2m2026-10-18T14:40:46.048272Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Total Cycles: 20004
[2m2026-10-18T14:40:46.048298Z[0m [32m INFO[0m [2mlabwired_cli::report[0m[2m:[0m Average IPS: 2013674.87
Hardware Coverage Report
| Peripheral ID | Base Address | Type |
|---|---|---|
allegro |
0xa0100000 |
allegro_e310 |
phy3 |
0x0000000c |
ethernetphysicallayer |
i2c_mux |
0x00000074 |
pca9548 |
tca6416_u97 |
0x00000020 |
tca6416 |
gdma |
0xfd500000 |
zynqmp_dma |
adma |
0xffa80000 |
zynqmp_dma |
uart0 |
0xff000000 |
cadence_uart |
uart1 |
0xff010000 |
cadence_uart |
i2c0 |
0xff020000 |
stub |
i2c1 |
0xff030000 |
stub |
ttc0 |
0xff110000 |
cadence_ttc |
ttc1 |
0xff120000 |
cadence_ttc |
ttc2 |
0xff130000 |
cadence_ttc |
ttc3 |
0xff140000 |
cadence_ttc |
gem0 |
0xff0b0000 |
cadencegem |
gem1 |
0xff0c0000 |
cadencegem |
gem2 |
0xff0d0000 |
cadencegem |
gem3 |
0xff0e0000 |
cadencegem |
phy |
0x00000000 |
ethernetphysicallayer |
gpio |
0xff0a0000 |
xilinxgpiops |
ipi |
0xff300000 |
stub |
rtc |
0xffa60000 |
stub |
L1_PLL_STATUS_READ_1_SERDES_REGISTER |
0xfd4063e4 |
arraymemory |
L2_PLL_STATUS_READ_1_SERDES_REGISTER |
0xfd40a3e4 |
arraymemory |
L3_PLL_STATUS_READ_1_SERDES_REGISTER |
0xfd40e3e4 |
arraymemory |
PS_CTRL_STATUS_AMS_REGISTER |
0xffa50040 |
pythonperipheral |
qspi |
0xff0f0000 |
stub |
Total Peripherals: 27