Skip to content

Adafruit Feather RP2350 with HSTX

The Adafruit Feather RP2350 with HSTX (Product ID 6000, no-PSRAM option) uses an RP2350 A4, 8 MiB QSPI flash, and 520 KiB SRAM. The RP2040/RP2350 family is demand group #2; RP2040 was measured at 12% (MCU rank 5), while RP2350 was not surveyed separately. The live product page listed the no-PSRAM board in stock when checked on 2026-11-13; see the availability receipt.

Status at a glance

Area Status
Chip and board descriptors RP2350 core profile with 8 MiB flash, 520 KiB SRAM, and GP0–GP29 pin labels
Board wiring UART0 on GP0/GP1; active-high red D13 LED on GP7
Firmware smoke UART marker plus at least two SIO GPIO7 edges; committed local CLI evidence
Hosted twin verification Not recorded for this board profile
Physical hardware comparison Not recorded

See the board example, system descriptor, and chip profile.

Board pin map

Feather pin RP2350 pad Use
TX / RX GP0 / GP1 UART0 TX / RX
SDA / SCL GP2 / GP3 STEMMA QT, I2C1 SDA / SCL
D13 GP7 Onboard red LED, active high
HSTX connector GP12–GP19 HSTX-capable GPIO; HSTX model not included
NeoPixel GP21 Onboard addressable LED; model not included
SCK / MO / MI GP22 / GP23 / GP20 Main SPI0 pins
A0–A3 GP26–GP29 ADC inputs

The pin map follows Adafruit's live board pinout guide.

Supported boundary

The local smoke executes a bare-metal Cortex-M33 firmware image on core 0. It toggles GPIO7 through SIO and writes a marker through the PL011 UART0 model. The committed smoke checks both observations against the exact Feather system and chip profile.

HSTX/DVI, USB enumeration and USB CDC, the bootloader path, NeoPixel behavior, charger behavior, and optional PSRAM are not represented by this smoke. POWMAN/TICKS and TBMAN remain stubs in the shared RP2350 model. The test does not establish physical-board behavior or validate the other peripherals in the chip descriptor.