Imported ATmega1284P onboarding smoke
This profile measures AVR8 instruction execution and SRAM access against the
imported 128 KiB flash / 16 KiB SRAM geometry. The fixture increments a volatile
SRAM counter and the smoke asserts the bounded max_steps stop after 100,000
instructions. It performs no peripheral accesses and asserts no board I/O.
The first attempt stopped during C runtime startup at 0x40ff because the AVR
CPU path had selected ATmega328P SRAM bounds. Added separate ATmega1284P flash
and SRAM geometry, then reran only this imported target. The failed attempt is
preserved in
attempt-history.
LabWired Part Knowledge returned NOT_FOUND for ATmega1284P. Peripheral
registers and board behavior therefore remain outside this profile; the result
is local CLI evidence for the CPU/SRAM smoke only.
Build the fixture with scripts/build_atmega1284p_cpu_smoke.sh. Result JSON,
JUnit assertions, simulator logs, and the snapshot are under
docs/coverage/renode-onboarding/metrics/simavr-atmega1284p/.
The final run executed 100,000 instructions / 185,705 cycles, passed its single
smoke assertion, and recorded zero peripheral accesses. It assumes an ideal
power rail, so power-on and brown-out behavior are not measured.