Imported ATmega16 onboarding smoke
This profile measures AVR8 execution, GPIOA and polled USART TX against the
imported 16 KiB flash / 1 KiB SRAM geometry (SRAM from 0x0060). ATmega16 has
the classic 64-byte I/O file: the chip maps only porta (PINA/DDRA/PORTA at
0x39..0x3B) and the CPU's USART host window, onto which the core translates
UBRRL/UCSRB/UCSRA/UDR at 0x29..0x2C. The fixture
tests/fixtures/avr/atmega16-io-smoke.c
runs seven checks: UBRRL and UCSRB readback, UDRE set, SBI on PORTA keeps PA7
and PINA0 follows the latch, CBI clears PA7 only, a PINA write does not toggle
(PINx is read-only on this part), and a 160-byte SRAM block at 0x82..0x121
reads back. That block covers addresses the ATmega328P map decodes as timer,
ADC, TWI and USART0 registers. It stores the check bits at 0x0122, prints
M16 IO bits=7F and toggles PA0 in a loop. The smoke asserts the UART text,
the result byte 0x7F, at least two PA0 edges and the bounded max_steps stop
after 100,000 instructions.
Not claimed: ports B-D, UBRRH/UCSRC, timers, ADC, SPI, TWI, interrupts and
EEPROM. The run assumes an ideal power rail. Result JSON, JUnit assertions,
simulator logs, and the snapshot are under
docs/coverage/renode-onboarding/metrics/simavr-atmega16/.
This is local CLI smoke evidence against the imported manifest, not full
ATmega16 coverage or hardware confirmation.