Skip to content

Imported ATtiny4313 onboarding smoke

This profile measures AVR8 execution, GPIOB and polled USART TX against the imported 4 KiB flash / 256 B SRAM geometry (SRAM from 0x0060). ATtiny4313 has the classic 64-byte I/O file: the chip maps only portb (PINB/DDRB/PORTB at 0x36..0x38) and the CPU's USART host window, onto which the core translates UBRRL/UCSRB/UCSRA/UDR at 0x29..0x2C. Unlike the ATmega8/16/32/128, PINx on this part is write-one-to-toggle. The fixture is tests/fixtures/avr/attiny2313-io-smoke.c built with -mmcu=attiny4313 -DPART_TAG='"4313"'. It runs seven checks: UBRRL and UCSRB readback, UDRE set, SBI on PORTB keeps PB7 and PINB0 follows the latch, CBI clears PB7 only, a PINB write toggles PB0 low, and a 48-byte SRAM block at 0x84..0xB3 reads back. It stores the check bits at 0x00B4, prints T4313 IO bits=7F and toggles PB0 through PINB in a loop. The smoke asserts the UART text, the result byte 0x7F, at least two PB0 edges and the bounded max_steps stop after 100,000 instructions.

Negative control: the same firmware and script against the previous CPU-only chip descriptor (peripherals: []) fails 0/4 (memory violation at 0x10036).

Not claimed: ports A/D, UBRRH/UCSRC, timers, USI, analog comparator, interrupts, EEPROM and the watchdog. The run assumes an ideal power rail. Result JSON, JUnit assertions, simulator logs, and the snapshot are under docs/coverage/renode-onboarding/metrics/simavr-attiny4313/. This is local CLI smoke evidence against the imported manifest, not full ATtiny4313 coverage or hardware confirmation.