Skip to content

STM32F446RE / NUCLEO-F446RE

Support: minimal firmware smoke (L1); simulated, not hardware-validated.

  • 512 KiB flash, 128 KiB RAM, Cortex-M4F, maximum 180 MHz.
  • Model: configs/chips/stm32f446re.yaml; board: configs/systems/nucleo-f446re.yaml.
  • Tested: Cortex-M reset/stack, RCC enables, USART2 output on PA2/PA3, GPIO PA5 edges.
  • The broader model also declares GPIO, timers, I2C, SPI, ADC, CAN and DMA; qualification varies by peripheral. The earlier stock STM32duino matrix evidence is recorded in examples/nucleo-f446re/evidence/arduino-matrix/.
  • Absent: USB, FMC, QuadSPI, DCMI, and other F446-specific blocks. Any access to an absent peripheral must produce a fault rather than a success claim.
  • Other functions, PLL rate modeling and register-reset parity need further evidence.

Build / run and validation receipt. ST product page.