Skip to content

STM32G431RB (Nucleo-G431RB)

Cortex-M4F, RM0440. 128 KiB flash, 22 KiB SRAM + 10 KiB CCM SRAM.

Status at a glance

Aspect Status
Chip yaml configs/chips/stm32g431rb.yaml
Validation tier-1 fast-boot fixture (tests/fixtures/tier1/stm32g431rb.elf) via examples/stm32g431rb/{tier1-smoke,io-smoke}.yaml
Tier structural — tier-1 fixture only, no silicon diff
Stock Arduino core Simulator-verified: stm32duino 2.12.0 nucleo_g431rb passes Arduino matrix L0–L8 (9/9: Serial on LPUART1, blink on PA5, INA219 on Wire, MAX31855 on SPI, ADC 512 at 1651 mV, 61 TIM2_CH1 edges on PA0, micros, FDCAN1 loopback); evidence in validation/arduino-matrix/evidence/nucleo-g431rb/

What is proven

  • The tier-1 raw-register self-test boots at the G431 geometry and reports its clock, GPIO and UART classes PASS, then TIER1 done (examples/stm32g431rb/io-smoke.yaml, examples/stm32g431rb/tier1-smoke.yaml).
  • Peripherals declared in the chip yaml reuse the stm32g474re RM0440 models: RCC (stm32g4 profile), GPIOA-D (stm32v2 profile), SysTick, USART1/2, LPUART1, FLASH (stm32g4 profile: 4-bit ACR.LATENCY), PWR, CRC, TIM2, TIM1 PWM (G4 pad map), FDCAN1, I2C1, SPI1, ADC1, DMA1, IWDG, RTC, NVIC
  • RAM is the 32 KB contiguous block at 0x20000000: SRAM1 + SRAM2 + the CCM SRAM alias at 0x20005800. The 0x10000000 CCM address is not mapped.

What is NOT proven

  • No STM32G431 silicon diff — no bench part.
  • No upstream Zephyr survival case yet.
  • G4-specific analog (OPAMP, COMP, DAC), CORDIC/FMAC and HRTIM are not modelled.
  • FDCAN1 is proven in internal loopback only; no CAN-FD bit-rate switching or external bus traffic is claimed.

Sources

  • configs/chips/stm32g431rb.yaml, cross-checked against ST DS12589 and RM0440.