Skip to content

Negative control: EFM32PG12 TIMERs on the Series-0 register map (discriminating)

The round-389 firmware (firmware-efm32pg12-smoke, checks in firmware-efm32jg1-smoke/src/s1.rs) ran against a copy of configs/chips/onboarding/efm32pg12.yaml (efm32pg12-negctl-chip.yaml) whose TIMER0/TIMER1 are efm32s0_timer instead of efm32s1_timer. Same bases (0x40018000/0x40018400), same IRQs, same everything else; the system file differed only in its chip: path. Run with the same target/debug/labwired binary that produced the passing metrics.

Result: FAIL 3/5. The six GPIO lines print, then nothing: on the Series-0 map offset 0x0C is IEN, not IF, so the tim0 up check's poll for IF.OF reads 0 until the step budget runs out (expected_stop_reason: max_steps still holds; the ordered UART lines and the summary word 0xEF3101FF do not). The Series-1 descriptor passes 5/5.