Skip to content

Negative control: EFM32PG12 with USART0 at 0x4000C000 (discriminating)

The round-387 firmware (firmware-efm32pg12-smoke, USART0 at 0x40010000, linked at 0x00000000) ran against a copy of the pre-fix configs/chips/onboarding/efm32pg12.yaml (efm32pg12-negctl-chip.yaml). In that copy USART0 sits at 0x4000C000, which is I2C0 on EFM32PG12 silicon and in Renode's efm32xg1x/efm32pg12.repl. The system file differed from configs/systems/onboarding/efm32pg12.yaml only in its chip: path.

Result: FAIL 1/2. The first USART0 write BusFaults at 0x4001000C, so uart_contains gets 0 bytes. The fixed descriptor passes 2/2. The old descriptor could only pass because the old firmware made the same wrong assumption.

The flash-base change (0x08000000 → 0x0) in the same round can't be told apart this way. flash_boot_alias mirrors any base at 0. See attempt-history/efm32zg222/2026-11-08-negative-control-flash-0x08000000.