Skip to content

egis_et171 negative control: uart0 removed (2026-11-08)

Same firmware (--features et171-uart) and smoke script, with uart0 removed from the chip (the egis_et171.yaml copy here, loaded through a one-line system manifest chip: egis_et171.yaml with labwired test --system). FAIL 1/6: the first uart0 access (the LCR write at 0xF020002C) is a memory access violation and the run stops after 13 instructions, so no UART bytes appear, the LSR/divisor and pass words at 0x1004..0x100C are never written, and the run does not reach max_steps. Only the MUL word at 0x1000 (written before any peripheral access) holds. The UART and register checks therefore depend on the modelled uart0.