Negative control: P1 parked at 0x50001000 (pre-fix descriptor)
Same firmware as the passing run (firmware-nrf52840-renode-smoke with
check_gpio_p1), chip descriptor from HEAD before this change (gpio0 4 KB
window, gpio1 at 0x50001000), in a /tmp system copy.
Result: FAIL 5/7. UART: gpio p1 in=00 drive=0 pull=0 gpiote=0 p0=1 FAIL,
summary 0x3FFF (bit 14 clear). Firmware P1 accesses at 0x50000804.. land in
gpio0's window and are lost. gpio_edges gpio1:3 still passed: GPIOTE
resolves gpio1 through ChipMap, so the pad toggled at the parked port while
firmware could not read it at the silicon address.