Negative control: TMP102 fixture removed (2026-11-20)
Same firmware and smoke script as the passing nrf52840 run, with the
tmp102_twi0 external device removed from a /tmp copy of
configs/systems/onboarding/nrf52840.yaml (system.yaml here).
Result: TWIM0 sees no slave at 0x48. Every transfer takes ANACK and the RX
buffer fills with 0xFF, so the line reads cfg=ffff temp=ffff ... FAIL and the
summary word is 0fff (bit 12 clear). 2 of 5 assertions fail (uart_ordered,
memory_value). All other blocks pass, so the TWIM0 check depends on the
attached device and nothing else.