Skip to content

Negative control: NPCX9 UART IRQ lines not wired

  • Date: 2026-11-16
  • CLI: lane debug build with the NPCX FIFO-mode UART registers and level IRQ.
  • Firmware: firmware-nuvoton-npcx9-smoke, SHA-256 317a070b8d7d79453a51a977169e142e282efe8191ee2152dff11b77a1d1af39 (the same ELF as the passing run).
  • Descriptor: configs/chips/onboarding/nuvoton_npcx9.yaml at 50912a434 (cr_uart1..4 without irq).
  • Smoke script: the current one (injections "bB", "cC", "dD").

Result: FAIL 8/9. uart irq fts=4 txp=0 txrel=4 frs=3 rx=0 hits=0 drained=0 FAIL. The UFTSTS / UFRSTS values are correct; no UART line pends and the RX handler never runs, so the second byte stays queued.