Skip to content

ramn negative control: LPUART1 removed (2026-11-08)

Same firmware and smoke script, with lpuart1 removed from the chip (the ramn.yaml copy here, loaded through a one-line system manifest chip: ramn.yaml with labwired test --system). FAIL 2/6: no UART bytes, no PB6 edges, and the result word at 0x20001004 is never written. Only the MUL word (written before any peripheral access) and the max_steps stop reason still hold. The first LPUART1 access (the BRR write at 0x4000800C, PC 0x080008C0) is unmapped and escalates to a HardFault (CFSR 0x8200 PRECISERR, BFAR 0x4000800C). The RCC and GPIO accesses before it succeed. The UART and GPIO-heartbeat checks therefore depend on the modelled LPUART1.