Negative control: FE310 GPIO without its PLIC source, same CLI, firmware and script
CLI: labwired built 2026-11-16 03:38 UTC by run_renode_onboarding_inventory.py
--only sifive-fe310 from the GPIO-interrupt change.
Chip: chip-gpio-unwired.yaml.txt, a copy of
configs/chips/onboarding/sifive-fe310.yaml without the GPIO irq: 8. The
GPIO model keeps its interrupt registers but drives no PLIC source.
Firmware: the 2026-11-16 FE310 GPIO-interrupt smoke, SHA-256
46ad0fc090ddda2a6d333f275fda0df0c5b47a0ce4fcd7cbdd215489af21504b.
Result: FAIL 2/4 checks at 400,000 steps. gpio irq rise ... rise_ip=00000004
... pending=0 disabled_low=1 meip=0 high_relatch=1 ... FAIL: the latch sets,
but PLIC source 10 never pends and MEIP stays low. The trap probe then waits
for an interrupt that does not come, so the later lines are absent. The
lines before it still pass.