Skip to content

STM32F103 ADC scan scope

The exact-import smoke checks a two-rank PA0/PA1 regular scan with EOC on each rank, first-rank ADC IRQ pending, and EOC clear after the CPU reads DR. A 13-rank one-shot scan then enables ADC1 DMA and drains results through DMA1 channel 1 into SRAM. The alternating IN0/IN1 values cover ranks 1–6 in SQR3, ranks 7–12 in SQR2, and rank 13 in SQR1; the smoke checks all 13 values, DMA transfer complete, CNDTR reaching zero, and DMA clearing EOC by reading DR.

The bounded model emits ADC1's DMA request on each completed regular rank only when CR2.DMA is set. The imported chip profile routes adc1_rx to DMA1 channel 1, the STM32F1 fixed mapping. The unit regression checks the per-rank request; the imported-system smoke checks the request-to-memory path.

The smoke also runs software-started two-rank scans with DMA1 channel 1 in circular mode. With TCIE disabled and HTIE enabled, two laps must set HTIF and pend DMA1 channel 1's IRQ, then complete with CNDTR reloaded to 2. A third lap enables both interrupt sources and checks the combined GIF/HTIF/TCIF state, independent HTIF and TCIF clears, CGIF clearing all channel flags, and NVIC pending clear behavior. It checks every result buffer, the channel remaining enabled, and EOC clearing after DMA reads DR. Larger-buffer half-transfer timing and other DMA routes remain unclaimed.

A separate continuous-mode run starts one two-rank scan with CONT set and drains two groups through a four-item normal-mode DMA transfer. The smoke checks both PA0/PA1 sequences, CNDTR zero, and that later ADC requests do not overwrite the result buffer after normal-mode transfer complete. DMA1 channel 1 remains enabled at TC; firmware must disable it before reloading CNDTR. See RM0008 Rev 21 §13.3.1: STM32F1 reference manual.

A second continuous-mode run combines the two-rank scan with circular DMA. It checks two laps into the same two-item PA0/PA1 buffer, both HTIF and TCIF, DMA1 channel 1's pending IRQ, CNDTR reload, the enabled channel, and EOC clearing after DMA reads DR. This covers the combined continuous-request and circular-reload path; it does not measure sample timing or long-duration ADC throughput.

The two earlier failed integration attempts for repeated NVIC pending during the CPU-serviced scan remain under docs/coverage/renode-onboarding/attempt-history/stm32f103/. The passing smoke claims the first-rank ADC pending bit only. It does not exercise long-duration continuous ADC operation, larger-buffer half-transfer timing, other DMA routes, or physical hardware behavior. Register behavior follows ST RM0008 Rev 21 §§11.3.8, 11.12.3, 11.12.9–11.12.11, 13.3.1, 13.3.4, and 13.4.1–13.4.2: STM32F1 reference manual.