Skip to content

stm32w108 negative control: SC1 removed (2026-11-08)

Same firmware and smoke script, with sc1 removed from the chip (the stm32w108.yaml copy here, loaded through a one-line system manifest chip: stm32w108.yaml with labwired test --system). FAIL 1/4: no UART bytes, and neither the result word nor the UARTSTAT readback is written. Only the max_steps stop reason still holds. The first SC1 access (the SC1_MODE write at 0x4000C854, PC 0x08000486) is unmapped and escalates to a HardFault (CFSR 0x8200 PRECISERR, BFAR 0x4000C854). The UART checks therefore depend on the modelled SC1. The timer checks never run because they come after the UART.